• Epoxen CP362 - Structural Epoxy System

Processing 

  • Thoroughly mix through Part A resin and Part B hardener accordingly to the mixing ratio for at least 4 minutes to get a uniform mixture.
  • Avoid the formation of bubbles.
  • Do not mix more than you are able to use within the pot life. The epoxy may be poured over the object, spread with a brush, or dispensed with a syringe.
  • The quoted pot life time refer to mixtures of 100 g. Larger quantities will cure faster due to the typical heat reaction of epoxy resins (exothermic reaction).
  • This system should be used at room temperature approximately 25°C. Pot life and cure time will be reduced at higher temperatures.
  • Blowing hot air over the surface of the epoxy can break any bubbles formed during mixing.


Storage

  • Store the chemical at room temperature in a dry place.
  • Unopened containers can be stored for 18 months at temperatures from 18°C to 25°C. After this date, the product may be processed only after reanalysis.
  • Partly emptied containers should be tightly closed immediately after use. 


Recommended Uses

  • CP362 can be machined and cut using a variety of powertools and equipment - including a router - no problem. We would recommend an initial cure period of 48 hours to allow sufficient hardening prior to any machining work.

 

Download Product Datasheets

Use the link below to download datasheets relating specifically to this product.

 CP362 Structural Epoxy TDS (Technical Datasheet)

This is the most versatile of the Epoxen products, being useful for coating, bonding, fiber glassing, a putty or filler base, and numerous others. It is a water clear color with specially designed to prevent serious bubbles and pin holes, the surface is glossy, blush free and hard after fully cured, solvent-free, unfilled with 100% solid content.

Epoxen CP362 : 'STANDARD' which has a pot-life of 35-40 mins and complete cure in around 13 hrs; It uses at a simple 2:1 volume ratio, works great tabletop, bartop, penny floor, wood construction and repair, for gel coat blister repair, and for general fiberglass repair.Use at temperatures as low as 35ºF with no limitations on humidity. The medium-low viscosity of Epoxen Structural Epoxy allows for use "as is" for coating and fiberglass work. Combine with different fillers to make adhesive, filleting and fairing compounds.

It is a remarkable clear epoxy resin developed specifically to provide a beautiful, hard-wearing, clear gloss surface for tabletops, bartops, decorative floor effects, furniture and creative projects. This amazing resin is self-levelling and cures to leave a stunning smooth, glossy surface which requires no flatting, polishing or further finishing - a true ‘pour and leave’ process. If you do need to polish the resin however, to remove scratches or add a soft radiused edge to a cast surface for example, it is very easy to polish using simple abrasive paper and polishing compounds to restore a full gloss.

The advanced ‘UV’ formulation of this epoxy system means that it has nonyellowing properties far superior to those conventional epoxies meaning that it will start beautiful and stay beautiful for years to come.


Pack Sizes

Epoxen CP362 is available in 2 different pack sizes:

  1. 3kg kit – one 2kg bottle Part A and one 1kg bottle Part B
  2. 15kg kit – two 5kg bottle Part A and one 5kg bottle Part B

Please choose the pack size required from the drop-down list at the top of the page.  

For wholesale quantities, please contact us to discuss your requirements.

Resin Properties
Resin viscosity (25C) 1000 - 1800 cps
Resin specific gravity 1.12
Hardener Properties
Hardener viscosity (25C) 450 cps
Hardener specific gravity 1.03
Mixed System Properties
Mix ratio by weight resin/hardener 100:50
Working time / gel time (25°C) 36 minutes
Tack-free time / basic cure time (25°C) 2.5 hours
Complete / post cure time (25°C) 10 hours

Epoxen CP362 - Structural Epoxy System

  • Brand: Epoxen Epoxy
  • Product Code: CP362
  • Availability: In Stock
  • RM180.00


Available Options


Related Products

Epoxen CP390 - Structural Epoxy System (semi transparent)

Epoxen CP390 - Structural Epoxy System (semi transparent)

This is the most cost effective epoxy resin which offering semi transparent appearance and can be co..

RM120.00

Epoxen CP61 - Epoxy Adhesive

Epoxen CP61 - Epoxy Adhesive

This is the most versatile of the Epoxen products, being useful for bonding. It is water clear colo..

RM170.00

Epoxen CP385 - High Temperature Epoxy System

Epoxen CP385 - High Temperature Epoxy System

CP385 is a high performance epoxy laminating resin designed for use at service temperatures up to 15..

RM185.00