Processing 

• Thoroughly mix through Part A resin and Part B hardener accordingly to the mixing ratio for at least 4 minutes to get a uniform mixture.
• Do not mix more than you are able to use within the pot life. The epoxy may be poured over the object, spread with a brush, or dispensed with a syringe.
• The quoted pot life time refer to mixtures of 100 g. Larger quantities will cure faster due to the typical heat reaction of epoxy resins (exothermic reaction).
• This system should be used at room temperature approximately 25°C. Pot life and cure time will be reduced at higher temperatures.
• Blowing hot air over the surface of the epoxy can break any bubbles formed during mixing.

Storage

• Store the chemical at room temperature in a dry place.
• Unopened containers can be stored for 18 months at temperatures from 18°C to 25°C. After this date, the product may be processed only after reanalysis.
• Partly emptied containers should be tightly closed immediately after use. 

Download Product Datasheets

Use the link below to download datasheets relating specifically to this product.